A quantum clock is a type of atomic clock with laser cooled single ions confined together in an electromagnetic ion trap. Developed in 2010 by National Institute of Standards and Technology physicists, the clock was 37 times more precise than the then-existing international standard. The quantum logic clock is based on an aluminium spectroscopy ion with a logic atom.
Both the aluminum-based quantum clock and the mercury-based optical atomic clock track time by the ion vibration at an optical frequency using a UV laser, that is 100,000 times higher than the microwave frequencies used in NIST-F1 and other similar time standards around the world. Quantum clocks like this are able to be far more precise than microwave standards.
The NIST team are not able to measure clock ticks per second because the definition of a second is based on the NIST-F1 which cannot measure a more precise machine. However the aluminum ion clock's measured frequency to the current standard is 1121015393207857.4(7)Hz. NIST have attributed the clock's accuracy to the fact that it is insensitive to background magnetic and electric fields, and unaffected by temperature.
In March 2008, physicists at NIST described an experimental quantum logic clock based on individual ions of beryllium and aluminum. This clock was compared to NIST's mercury ion clock. These were the most accurate clocks that had been constructed, with neither clock gaining nor losing time at a rate that would exceed a second in over a billion years.
In February 2010, NIST physicists described a second, enhanced version of the quantum logic clock based on individual ions of magnesium and aluminium. Considered the world's most precise clock in 2010 with a fractional frequency inaccuracy of 8.6 × 10−18, it offers more than twice the precision of the original.  In terms of standard deviation, the quantum logic clock deviates one second every 3.68 billion (3.68 × 109) years, while the then current international standard NIST-F1 Caesium fountain atomic clock uncertainty was about 3.1 × 10−16 expected to neither gain nor lose a second in more than 100 million (100 × 106) years.  In July 2019, NIST scientists demonstrated such a clock with total uncertainty of 9.4 × 10−19 (deviates one second every 33.7 billion years), which is the first demonstration of a clock with uncertainty below 10−18.
In 2010 an experiment placed two aluminum-ion quantum clocks close to each other, but with the second elevated 12 in (30.5 cm) compared to the first, making the gravitational time dilation effect visible in everyday lab scales.
The accuracy of quantum clocks was briefly superseded by optical lattice clocks based on strontium-87 and ytterbium-171 until 2019. An experimental optical lattice clock was described in a 2014 Nature paper. In 2015 JILA evaluated the absolute frequency uncertainty of their latest strontium-87 optical lattice clock at 2.1 × 10−18, which corresponds to a measurable gravitational time dilation for an elevation change of 2 cm (0.79 in) on planet Earth that according to JILA/NIST Fellow Jun Ye is "getting really close to being useful for relativistic geodesy". At this frequency uncertainty, this JILA optical lattice optical clock is expected to neither gain nor lose a second in more than 15 billion (1.5 × 1010) years.