In music, the dynamics of a piece is the variation in loudness between notes or phrases. Dynamics are indicated by specific musical notation, often in some detail. However, dynamics markings still require interpretation by the performer depending on the musical context: for instance a piano (quiet) marking in one part of a piece might have quite different objective loudness in another piece, or even a different section of the same piece. The execution of dynamics also extends beyond loudness to include changes in timbre and sometimes tempo rubato.
This section needs additional citations for verification. (October 2019) (Learn how and when to remove this template message)
Dynamics are one of the expressive elements of music. Used effectively, dynamics help musicians sustain variety and interest in a musical performance, and communicate a particular emotional state or feeling.
Dynamic markings are always relative. p never indicates a precise level of loudness, it merely indicates that music in a passage so marked should be considerably quieter than f. There are many factors affecting the interpretation of a dynamic marking. For instance, the middle of a musical phrase will normally be played louder than the beginning or ending, to ensure the phrase is properly shaped, even where a passage is marked p throughout. Similarly, in multi-part music, some voices will naturally be played louder than others, for instance to emphasis the melody and the bass line, even if a whole passage is marked at one dynamic level. Some instruments are naturally louder than others – for instance, a tuba playing piano will likely be louder than a guitar playing fortissimo, while a high-pitched instrument like the piccolo playing in its upper register can usually sound loud even when its actual decibel level is lower than that of other instruments.
Further, a dynamic marking does not necessarily only affect loudness of the music. A forte passage is not usually "the same as a piano passage but louder". Rather, a musician will often use a different approach to other aspects of expression like timbre or articulation to further illustrate the differences. Sometimes this might also extend to tempo. It's important for a performer to be able to control dynamics and tempo independently, and thus novice musicians are often instructed "don't speed up just because it's getting louder!". However, in some circumstances, a dynamic marking might also indicate a change of tempo.[a]
In some music notation programs, there are default MIDI key velocity values associated with these indications, but more sophisticated programs allow users to change these as needed. These defaults are listed in the following table for some applications, including Apple's Logic Pro 9 (2009-2013), Avid's Sibelius 5 (2007-2009), and musescore.org's MuseScore 3.0 (2019). MIDI specifies the range of key velocities as an integer between 0 and 127:
|Logic Pro 9 dynamics||16||32||48||64||80||96||112||127|
|Sibelius 5 dynamics||20||39||61||71||84||98||113||127|
|MuseScore 3.0 dynamics||16||33||49||64||80||96||112||126|
|fortississimo||fff||very very loud|
|pianississimo||ppp||very very soft|
The two basic dynamic indications in music are:
More subtle degrees of loudness or softness are indicated by:
Use of up to three consecutive fs or ps is also common:
Three Italian words are used to show gradual changes in volume:
Signs sometimes referred to as "hairpins" are also used to stand for these words (See image). If the angle lines open up (), then the indication is to get louder; if they close gradually (), the indication is to get softer. The following notation indicates music starting moderately strong, then becoming gradually stronger and then gradually quieter:
Hairpins are usually written below the staff (or between the two staves in a grand staff), but are sometimes found above, especially in music for singers or in music with multiple melody lines being played by a single performer. They tend to be used for dynamic changes over a relatively short space of time (at most a few bars), while cresc., decresc. and dim. are generally used for changes over a longer period. Word directions can be extended with dashes to indicate over what time the event should occur, which may be as long as multiple pages. The word morendo ("dying") is also sometimes used for a gradual reduction in dynamics (and tempo).
For greater changes in dynamics, cresc. molto and dim. molto are often used, where the molto means "much". Similarly, for more gradual changes poco cresc. and poco dim. are used, where "poco" translates as a little, or alternatively with poco a poco meaning "little by little".
Sudden changes in dynamics may be notated by adding the word subito (meaning "suddenly") as a prefix or suffix to the new dynamic notation. Subito piano (abbreviated sub. p) ("suddenly soft") indicates that the dynamics quickly, almost abruptly, lower the volume to approximately the p range. It is often purposefully used to subvert the listeners expectation and will signify an intimacy expression. Although it uses the piano p dynamic symbol, the performer has slight freedom in their interpretation, causing it to vary based on the preceding loudness or character of the piece.
Accented notes can be notated sforzando, sforzato, forzando or forzato (abbreviated sfz, sf, or fz) ("forcing" or "forced"), or using the sign >, placed above or below the head of the note.
Sforzando (or sforzato, forzando, forzato) indicates a forceful accent and is abbreviated as sf, sfz or fz. There is often confusion surrounding these markings and whether or not there is any difference in the degree of accent. However, all of these indicate the same expression, depending on the dynamic level, and the extent of the sforzando is determined purely by the performer.
The fortepiano notation fp indicates a forte followed immediately by piano. By contrast, pf is an abbreviation for poco forte, literally "a little loud" but (according to Brahms) meaning with the character of forte, but the sound of piano, though rarely used because of possible confusion with pianoforte).
While the typical range of dynamic markings is from ppp to fff, some pieces use additional markings of further emphasis. Extreme dynamic markings imply an extreme range of loudness, or, alternatively, imply an extremely subtle distinction between very small differences of loudness within a normal range. This kind of usage is most common in orchestral works from the late 19th-century onwards. Generally, these markings are supported by the orchestration of the work, with heavy forte markings brought to life by having many loud instruments like brass and percussion playing at once.
In Holst's The Planets, ffff occurs twice in "Mars" and once in "Uranus", often punctuated by organ. Tchaikovsky marks a bassoon solo pppppp (6 ps) in his Pathétique Symphony and uses ffff in passages of his 1812 Overture and his Fifth Symphony. The baritone passage "Era la notte" from Verdi's opera Otello uses pppp, though the same spot is marked ppp in the full score. Igor Stravinsky used ffff at the end of the finale of the 1919 Firebird Suite. Sergei Rachmaninoff uses sffff in his Prelude in C♯, Op. 3 No. 2. Gustav Mahler, in the third movement of his Seventh Symphony, gives the celli and basses a marking of fffff (5 fs), along with a footnote directing 'pluck so hard that the strings hit the wood'.[b] On the other extreme, Carl Nielsen, in the second movement of his Fifth Symphony, marked a passage for woodwinds a diminuendo to ppppp (5 ps), and the original piano version of F. W. Meacham's American Patrol begins at pppp and ends at ppppp. György Ligeti uses extreme dynamics in his music: the Cello Concerto begins with a passage marked pppppppp (8 ps) and in his Piano Études Étude No. 9 (Vertige) ends with a diminuendo to pppppppp (8 ps), while Étude No. 13 (L'Escalier du Diable) contains a passage marked ffffff (6 fs) that progresses to a ffffffff (8 fs).
On Music, one of the Moralia attributed to the philosopher Plutarch in the first century AD, suggests that ancient Greek musical performance included dynamic transitions – though dynamics receive far less attention in the text than does rhythm or harmony.
The Renaissance composer Giovanni Gabrieli was one of the first to indicate dynamics in music notation, but dynamics were used sparingly by composers until the late 18th century. J.S. Bach used some dynamic terms, including forte, piano, più piano, and pianissimo (although written out as full words), and in some cases it may be that ppp was considered to mean pianissimo in this period.
The fact that the harpsichord could play only "terraced" dynamics (either loud or soft, but not in between), and the fact that composers of the period did not mark gradations of dynamics in their scores, has led to the "somewhat misleading suggestion that baroque dynamics are 'terraced dynamics'," writes Robert Donington. In fact, baroque musicians constantly varied dynamics: in 1752, Johann Joachim Quantz wrote that "Light and shade must be constantly introduced ... by the incessant interchange of loud and soft." In addition to this, the harpsichord in fact becomes louder or softer depending on the thickness of the musical texture (four notes are louder than two). This allowed composers like J.S. Bach to build dynamics directly into their compositions, without the need for notation.
In the Romantic period, composers greatly expanded the vocabulary for describing dynamic changes in their scores. Where Haydn and Mozart specified six levels (pp to ff), Beethoven used also ppp and fff (the latter less frequently), and Brahms used a range of terms to describe the dynamics he wanted. In the slow movement of Brahms's trio for violin, horn and piano (Opus 40), he uses the expressions ppp, molto piano, and quasi niente to express different qualities of quiet. Many Romantic and later composers added più p and più f, making for a total of ten levels between ppp and fff.
The introduction of modern recording techniques has provided alternative ways to control the dynamics of music. Dynamic range compression is used to control the dynamic range of a recording, or a single instrument. This can affect loudness variations, both at the micro- and macro scale. In many contexts, the meaning of the term dynamics is therefore not immediately clear. To distinguish between the different aspects of dynamics, the term performed dynamics can be used to refer to the aspects of music dynamics that is controlled exclusively by the performer.
|Look up fortissimo or decrescendo in Wiktionary, the free dictionary.|